This prevents any possibility of accidentally sending audio or transient signals to the speakers that may damage them. Connect the analog output of a CD player to the CD inputs. NOTE: When the CD player has both fixed and variable audio outputs it is best to use the fixed output unless you find that the input to the receiver is so low that the sound is noisy, or so high that the signal is distorted.
Connect the digital output of any digital sources such as a CD or DVD changer or player, advanced video game, a digital satellite receiver, HDTV tuner or digital cable set-top box or the output of a compatible computer sound card to the Optical and Coaxial Digital Inputs.
Assemble the AM Loop Antenna supplied with the unit as shown below. The FM antenna may be an external roof antenna, an inside powered or wire lead antenna or a connection from a cable system.
Note that if the antenna or connection uses ohm twin-lead cable, you should use a ohm-toohm adapter to make the connection. Connect the front, center and surround speaker outputs to the respective speakers. To assure that all the audio signals are carried to your speakers without loss of clarity or resolution, we suggest that you use high-quality speaker cable. Many brands of cable are available and the choice of cable may be influenced by the distance between your speakers and the receiver, the type of speakers you use, personal preferences and other factors.
Your dealer or installer is a valuable resource to consult in selecting the proper cable. Regardless of the brand of cable selected, we recommend that you use a cable constructed of fine, multistrand copper with an area greater than 2 mm 2.
Cable with an area of 1. We do not recommend that you use cables with an area less than 1mm 2 due to the power loss and degradation in performance that will occur. Cables that are run inside walls should have the appropriate markings to indicate listing with any appropriate testing agency standards. Questions about running cables inside walls should be referred to your installer or a licensed electrician who is familiar with the applicable local building codes in your area.
When connecting wires to the speakers, be certain to observe proper polarity. NOTE: While most speaker manufacturers adhere to an industry convention of using black terminals for negative and red ones for positive, some manufacturers may vary from this configuration. We also recommend that the length of cable used to connect speaker pairs be identical.
For example, use the same length piece of cable to connect the front-left and front-right or surround-left and surround-right speakers, even if the speakers are a different distance from the AVR. It is appropriate to configure the AVR for either 5. When 6. Connecting only one loudspeaker to these speaker terminals will not only deprive you of the benefits of 7.
It may also put undesirable strain on the surround back amplifier circuits and power supplies. Connections to a subwoofer are normally made via a line level audio connection from the Subwoofer Output to the line-level input of a subwoofer with a built-in amplifier.
When a passive subwoofer is used, the connection first goes to a power amplifier, which will be connected to one or more subwoofer speakers. If you are using a powered subwoofer that does not have line-level input connections, follow the instructions furnished with the speaker for connection information.
If an external multi-channel audio source with 5. As such, it is more than suitable for most loudspeakers. However, in some circumstances you may wish to use an optional, external power amplifier for added power. This is easily done by connecting the. The speakers to be used with the external amplifier are then connected to the appropriate output terminals on the power amplifier, not those on the AVR.
Video equipment is connected in the same manner as audio components. Again, the use of highquality interconnect cables is recommended to preserve signal quality. Connect the analog audio and video outputs of a satellite receiver, cable TV converter or television set or any other video source to the. Connect the Composite and S-Video if S-Video device is in use Monitor Output jacks on the receiver to the composite and S-Video input of your television monitor or video projector.
Note that even when component video connections are used the audio connections must still be made to. If another component video device is available, connect it to the Video 2 Component Video Input jacks. The audio connections for this device should be made to either the. If the component video inputs are used, connect the Component Video Output to the component video inputs of your TV, projector or display device. See page 17 for more information on input configuration.
S-Video signals will be converted to composite signal. You must switch to the standard composite or S-Video input on your TV to view those menus. But this is only correct as long as only the three RGB video signals are output by the video source, with a sync signal in the "G" signal only, without any sync signal output separately by the source.
Do not misconnect Audio and Video signals. Note that only the video plugs the "yellow" cinch plug in fig. If the adapter plugs are not labeled in that way, pay attention to the signal flow directions as shown in the diagrams above and in the instruction attached to the adapter. When both connections are made, only the S-Video signal will be viewed on the screen.
S S - - Video Out. S S - - Video Out Out. These specific signals are: With all video sources, the signal for automatic input selection that switches the TV automatically to the appropriate input as soon as the video source is started. With any adapter cable, these control signals will be lost and the appropriate setting of the TV must be made manually.
If the receiver is placed behind a solid or smoked glass cabinet door, the obstruction may prevent the remote sensor from receiving commands. In this event, the remote sensor of any Harman Kardon or other compatible device, not covered by the door, or an optional remote sensor may be used. If other components are also prevented from receiving remote commands, only one sensor is needed. This unit is equipped with two accessory AC outlets. They may be used to power accessory devices, but they should not be used with high-current draw equipment such as power amplifiers.
The total power draw to the Unswitched Outlet must not exceed watts, that to the Switched Outlet 50 watts. The Switched outlet will receive power only when the unit is on completely. NOTE: Many audio and video products go into a Standby mode when they are used with switched outlets, and cannot be fully turned on using the outlet alone without a remote control command. The Unswitched outlet will receive power as long as the unit is plugged into a powered AC outlet and the Main Power Switch 1 is on.
The AVR draws significantly more current than other household devices such as computers that use removable power cords. For that reason, it is important that only the cord supplied with the unit or a direct replacement of identical capacity be used.
Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions.
Enter a new password. Thank you for choosing Harman Kardon! With the purchase of a Harman Kardon AVR you are about to begin many years of listening enjoyment.
Do Not Open the Cabinet There are no user-serviceable components inside this product. Cleaning When the unit gets dirty, wipe it with a clean, soft, dry cloth. Moving the Unit Before moving the unit, be certain to disconnect any interconnection cords with other components, and make certain that you disconnect the unit from the AC outlet. Unpacking The carton and shipping materials used to protect your new receiver during shipment were specially designed to cushion it from shock and vibration.
Note that the Power Indicator 3 will turn blue when the unit is on. Note: The total power consumption of all devices connected to the accessory outlets should not exceed watts from the Unswitched Outlet and 50 W from the Switched Outlet.
Monitor Component Video Outputs: Connect these outputs to the component video inputs of a video projector or monitor. When a source connected to one of the two Component Video Inputs is selected the signal will be sent to these jacks. Each press of the button changes the time until turn-off in the following order: 90 80 70 60 50 min min min min min 40 30 20 10 OFF min min min min Hold the button pressed for two seconds to turn off the Sleep mode setting.
NOTE: With the press of any remote button the Input Selector button 45 associated with the botton pressed will briefly flash red to confirm the transmission of the command, as long as there is a function for that button with the device selected see function list on pages Audio Equipment Connections We recommend that you use high-quality interconnect cables when making connections to source equipment and recorders to preserve the integrity of the signals.
Connect the digital output of any digital sources such as a CD or DVD changer or player, advanced video game, a digital satellite receiver, HDTV tuner or digital cable set-top box or the output of a compatible computer sound card to the Optical and Coaxial Digital Inputs! Connect the supplied FM antenna to the FM 75 ohm connection. This is easily done by connecting the Preamp Output Jacks on the AVR to the input jacks on the amplifier for the channels to be used.
Video Equipment Connections Video equipment is connected in the same manner as audio components. Note that even when component video connections are used the audio connections must still be made to either the analog DVD Audio Inputs or any of the Coaxial or Optical Digital Input jacks!.
A few minutes spent learn- ing the functions of the various controls will enable you to take advantage of all the power the AVR is able to deliver. If you have any questions about this product, its installation or its operation, please contact your retailer or custom installer. They are your best local sources of information. In addition to providing a wide range of listening options, the AVR is easy to configure so that it provides the best results with your speakers and specific listening-room environment.
A Stereo-Direct mode bypasses the digital processor to preserve all of the subtleties of older analog, two-channel materials, while bass management, available in the surround and Stereo-Digital modes,improves your ability to tailor the sound to suit your room acoustics or taste. For the ultimate in flexibility, the AVR features connections for five video devices, all with both composite and S-Video inputs.
Two additional audio inputs are available, and a total of six digi- tal inputs and three outputs make the AVR capable of handling all the latest digital audio sources. Coax and optical digital outputs are available for direct connection to digital recorders. Harman Kardon invented the high-fidelity receiver more then fifty years ago. With state-of- the-art circuitry and time-honored circuit designs, the AVR is the perfect combination of the latest in digital audio technology, a quiet yet powerful analog amplifier in an elegant, easy-to-use package.
Important Safety Information. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the unit. If you have any questions about the voltage requirements for your specific model, or about the line voltage in your area, contact your dealer before plugging the unit into a wall outlet.
We do not recommend that extension cords be used with this product. As with all electrical devices, do not run power cords under rugs or carpets or place heavy objects on them. Damaged power cords should be replaced immediately by an authorized service depot with a cord meeting factory specifications.
If you do not intend to use the unit for any considerable length of time, disconnect the plug from the AC outlet. Do Not Open the Cabinet There are no user-serviceable components inside this product.
Opening the cabinet may present a shock hazard, and any modification to the product will void your guarantee. If water or any metal object such as a paper clip, wire or a staple accidentally falls inside the unit, disconnect it from the AC power source immediately, and consult an authorized service station.
When placing the unit on a shelf, be certain that the shelf and any mounting hardware can support the weight of the product.
Denon Soundbar. Samsung Soundbar. Chunghop RME. GE Universal Remote. Zenith Universal Remote Control. RCA 3 in 1. Chunghop Universal Remote Control. Disclaimer: DirecTutor. Republication of the contents are expressly prohibited without the written consent of DirecTutor.
0コメント